01OAIQD, 01OAINE

A.A. 2021/22

Course Language

Inglese

Course degree

Master of science-level of the Bologna process in Ingegneria Meccanica (Mechanical Engineering) - Torino

Master of science-level of the Bologna process in Ingegneria Meccanica - Torino

Course structure

Teaching | Hours |
---|---|

Lezioni | 70 |

Esercitazioni in aula | 21 |

Esercitazioni in laboratorio | 9 |

Teachers

Teacher | Status | SSD | h.Les | h.Ex | h.Lab | h.Tut | Years teaching |
---|---|---|---|---|---|---|---|

Amati Nicola | Professore Ordinario | ING-IND/14 | 70 | 21 | 0 | 0 | 5 |

Teaching assistant

Context

SSD | CFU | Activities | Area context |
---|---|---|---|

ING-IND/14 | 10 | B - Caratterizzanti | Ingegneria meccanica |

2021/22

The aim of the subject is to provide the students with the basic knowledge needed for the structural dynamic analysis and the dynamic design of machines. Computational methods, and more in detail the numerical methods more common in the design practice will be intorduced. Theoretical aspects needed to obtain the deeper knowledge of the subject required to operate in the present innovative industrial environment are not neglected. The last part of the course is dedicated to the study of the dynamic analysis of rotating machinery, reciprocating engines, dynamic behaviour of electromagnetic controlled systems.

The increment of the productivity in production sites and power generation plants, the improvement of the transportation systems and in general the reduction of the environmental impacts rather than the improvement of the life quality is pushing the design and construction of high performing machines and lighter structures. Their dynamic design is therefore receiving always more attention.
In this context, the aim of the subject of Dynamic Design of Machines is to give the students the basic knowledge needed for the structural dynamic analysis and the dynamic design of machines. Computational methods, and more in detail numerical methods more common in the design practice will be introduced. Theoretical aspects needed to obtain the deeper knowledge of the subjects required to operate in the present innovative industrial environment are taken into account. The design and construction of machines equipped with electromagnetic controlled systems is not neglected.
The second part of the course is dedicated to the dynamic study and design of rotating machinery and reciprocating engines introducing adequate numerical methods.
The theoretical studies will be supported by exercise lectures that will be devoted to solve specific items. The format of the exercises is similar to the ones that the students have to solve at the written exam. Exercise lectures will be completed by the development of project works taken from real industrial applications.
Additional laboratory experience are thought to involve students in real experiments to acquire the sensitivity that numerical results should be supported by experimental evidences.

Students are required to learn the basics of the dynamics of vibration and of the analytical and numerical methods commonly used for machine design. Students must learn how to apply this knowledge to the actual dynamic study of machines and their elements, using them in a machine design context. The ability of interpreting in a critical way the results obtained, in particular through numerical methods, is also required. Student must also learn to produce technical documentation of the work done.

Students are required to learn the basics of machine dynamics and vibration of structures by the analytical and numerical methods commonly used for machine design.
Students must learn how to apply this knowledge to the actual dynamic study of machines and their elements, using them in a machine design context. The ability of interpreting in a critical way the results obtained by numerical simulations and experimental tests.
Student must also learn to produce technical documentation of the work done.

A good knowledge of the basic concepts of applied mechanics and of the methods of static stress analysis is required. A basic ability in using the relevant computer codes is also required, although no previous experience with specific numerical tools is needed.

A good knowledge of the basic concepts of applied mechanics and of the methods of static stress analysis is required. A basic ability in using Matlab/Simulink is needed for the development of projects and for the Laboratory activities.

Here below is reported the Course Syllabus.
Introduction to the course (2 hours). Mechanical design, static and dynamic stress analysis. Classical and numerical approach. Automatic computation in design. Numerical simulation. Computer aided engineering (CAE).
Part 1 (9 hours of theory lectures, 6 hours of classroom exercise lectures). Overview on the dynamic analysis of linear systems. Discrete linear systems: equations of motion in the configuration space; equations in Lagrange form. State space. Block diagrams. Free behaviour of single and multi-d.o.f. systems. Modal uncoupling; modal participation factors. Forced response to harmonic excitation. Viscous, Viscoelastic, Electromagnetic, Structural damping. Systems with frequency dependent parameters. Forced response to non harmonic excitation; short account of random vibrations.
Exercises addressing specific issues on the subject. Assignment of a project work dedicated to the fatigue design of mechanical parts in a mechanical subsystem affected by the vibration motion of the same subsystem.
Part 2 (18 hours of theory lectures, 9 hours of classroom exercise lectures, 3 hours of laboratory experience). Numerical methods and discretization techniques.
Lumped parameter methods, Finite element method in dynamics. Reduction techniques. Time domain and frequency domain solutions, numerical simulation.
Specific exercises addressing the issues on the subject. Assignment of a project work dedicated to the design of a dynamic damper of a vibrating structure. Laboratory experience on the identification of the parameters of a vibrating structure.
Part 3 (15 hours of lectures, 9 hours of exercises, 3 hours of laboratory exercises). Dynamics of rotating machines. Vibrations of rotors: Campbell diagram, critical speeds and fields of instability. Undamped and damped Jeffcott rotor. Rotor with 4 degrees of freedom, gyroscopic effect. Rotors with many degrees of freedom. Nonisotropic machines. Rotors on rolling, hydrodynamic and magnetic bearings. Balancing of rotors.
Specific exercises addressing the issues on the subject. Assignment of a project work dedicated to the design of support stiffness and damping of a rotating machinery modelled using a FE approach. Laboratory experience on the test of a rotor affected by rotating and non - rotating damping.
Part 4 (9 hours of lectures, 3 hours of exercises). Dynamics of reciprocating machines: Vibration of reciprocating engines and compressors, classical frequency domain and numerical time domain methods, equivalent system for torsional vibration, damping system for torsional vibrations of crankshafts (dynamic dampers).
Specific exercises addressing the issues on the subject.
Part 5: An overview on nonlinear vibration (3 hours): approximated methods, Duffing equation, jump phenomenon. Numerical simulation, basic concepts on chaotic vibration.
Specific exercises addressing the issues on the subject.
Part 6: Short Outline in Controlled Electromagnetic and Electromechanical Systems (7,5 hours of lectures, 3 hours of laboratory exercises): general considerations, open-loop control, closed-loop control, basic control laws, design of controlled systems.
Specific exercises addressing the issues on the subject.
Laboratory experience on the tuning of the control parameters of active magnetic bearings.

Here below is reported the Subject Syllabus.
Introduction to the course (1 hour). Mechanical design, static and dynamic stress analysis. Classical and numerical approach. Automatic computation in design. Numerical simulation. Computer aided engineering (CAE).
Part 1 (15 hours of theory lectures, 3 hours of classroom exercise lectures). Recap on the dynamic analysis of linear discrete systems: equations of motion in the configuration space and state space; block diagrams; derivation of the equations of motion using the Lagrange Approach. Free behaviour of multi-d.o.f. systems: modal uncoupling; modal participation factors. Forced response to harmonic and non-harmonic excitations. Viscous, Viscoelastic, Electromagnetic, Structural damping. Short account of random vibrations.
Exercises addressing specific items on the subject. Assignment of a project work dedicated to the fatigue design of mechanical parts in a mechanical subsystem affected by the vibration motion.
Part 2 (15 hours of theory lectures, 6 hours of classroom exercise lectures, 3 hours of laboratory experience).
Dynamic design of structures and machines using the finite element method with the implementation of adequate reduction techniques (static reduction, Guyan reduction, modal reduction,…).
Specific exercises addressing the issues on the subject. Assignment of a project work dedicated to the design of a dynamic damper of a vibrating structure.
Laboratory experience on the identification of the parameters of a vibrating structure equipped with a dynamic damper.
Part 3 (9 hours of lectures, 3 hours of exercises, 3 hours of laboratory experience)
Basics on the control of mechanical structures and machines: open-loop control, closed-loop control, basic control laws, design of controlled systems.
Analysis on the dynamic behaviour of controlled mechanical structures and machines. Design of electromechanical systems.
Specific exercises on the subject covered at theory lectures.
Laboratory experience on the design of the control parameters of an electromagnetic actuators controlling the bending vibration of a cantilever beam.
Part 4 (18 hours of lectures, 6 hours of exercises, 3 hours of laboratory experience). Dynamic design of rotating machines. Vibrations of rotors: Campbell diagram, critical speeds and fields of instability. Undamped and damped Jeffcott rotor. Rotor with 4 degrees of freedom, gyroscopic effect. Rotors with many degrees of freedom. Nonisotropic machines. Rotors on rolling, hydrodynamic and magnetic bearings. Balancing of rotors.
Specific exercises addressing the issues on the subject.
Assignment of a project work dedicated to the design of support stiffness and damping of a rotating machinery modelled using a FE approach.
Laboratory experience on the test of a rotor affected by rotating and non - rotating damping.
Part 5 (12 hours of lectures, 3 hours of exercises). Dynamics of reciprocating machines: vibration of reciprocating engines and compressors, classical frequency domain and numerical time domain methods, equivalent system for torsional vibration, computation of the forcing functions, damping system for torsional vibrations of crankshafts (dynamic dampers).
Specific exercises addressing the issues on the subject.

The course is based on a total of 64 hours of lectures plus 36 hours of classroom and laboratory exercises.
Lectures will be held with the support of the blackboard, slides and notes.
The exercise classes will deal with a number of exercises aimed to a better understanding of the subjects dealt with during theoretical classes and in a number of projects, the students will prepare in team. The technical reports on the projects will deal specific problems of dynamic structural analysis related to specific machine elements.
Some of these exercises will be performed in a computer lab, using specific numerical tools, while others will be performed in the experimental lab.
The documentation used during the theoretical classes and the exercises will be made available to the students through the website.

The subject is based on a total of 70 hours of lectures, 21 hours of classroom exercises plus 9 hours of laboratory experiences.
Lectures will be held with the support of the blackboard, slides and notes.
The exercise classes will deal with a number of exercises aimed to a better understanding of the subjects dealt with during theoretical classes and in a number of project works.
The students will develop the project works in team. The technical reports on the project works will deal specific problems of dynamic design of specific machine elements.
Some of the exercises will be performed in computer labs using specific numerical tools (codes in Matlab/Simulink) while others will be performed in the experimental lab.
The documentation used during the theoretical classes and the exercises will be made available to the students through the website.

The textbook for the course is: Genta G., Vibration Dynamics and Control, Springer, New York, 2009, ISBN 978 0 387 79579 9 or, alternatively, , Genta G., Vibrazioni delle strutture e delle macchine, Levrotto e Bella, Torino, 1996.
Other textbooks that can be used for specific parts of the course are Genta G, Vibration of structures and machines, III ed., Springer, New York, 1998, ISBN: 0 387 98506 9 and Genta G., Dynamics of Rotating Systems, Springer, New York, 2005 ISBN: 0-387-20936-0.
Additional material for exercises will be supplied through the course website

The textbook for the course is
• Genta G., Vibration Dynamics and Control, Springer, New York, 2009, ISBN 978 0 387 79579 9 or, alternatively, , Genta G., Vibrazioni delle strutture e delle macchine, Levrotto e Bella, Torino, 1996.
Other textbooks that can be used for specific parts of the course are:
• Genta G, Vibration of structures and machines, III ed., Springer, New York, 1998, ISBN: 0 387 98506 9.
• Genta G., Dynamics of Rotating Systems, Springer, New York, 2005 ISBN: 0-387-20936-0.
• S. H. Crandall, Dynamics of Mechanical and Electromechanical Systems, Krieger Pub C, 1982, ISBN-13: 978-0898745290.
• S. H. Crandall, Random Vibration in Mechanical Systems, Academic Press, 2014.
• G. Belingardi, Il Metodo degli Elementi Finiti nella Progettazione Meccanica, Levrotto & Bella, 1995.
Other learning resources (uploaded on the Portale della Didattica from time to time before each class):
• Lecture Notes,
• Exercise texts and solutions,
• Documentation for the development of the project works,
• Video, Guidelines for Laboratory experiences.

...
The assessment will include a written test followed by an oral examination. To be allowed to the oral exam the student must have passed the written test with at least 18/30 rating.
Written test
The written test will consist of 30 multiple choice tests (correct answer: 1 point; no answer 0 points; wrong answer: -0.5 points) plus 8 exercises (correct answer: 2 points; no or wrong answer: 0 points) to be answered in 2 hours. At least 15 tests and 4 exercises must be answered. No books, notes or other material are allowed at the written test. Use of a cell phone or other communication device will cause immediate expulsion.
Oral exam
If the rating of the written test is between 18/30 and 23/30 (included) the oral exam may be
substituted by a discussion on the project report. This can produce an increase or a decrease of the rating up to 2 points, depending on how the project are made. A complete failure of answering questions about the project report causes a failure of the exam. If the student aims to obtain more than 23/30 or he has answered less than 15 tests and 4 exercises the oral exam is compulsory.
If the rating of the written test is in between 24/30 and 30/30 the oral exam is compulsory.
The oral exam includes at any rate a discussion on the project reports. A failure of answering the questions on the project reports or the presentation of incomplete projects causes a complete failure of the exam.
It is recommended to book the exam only when there is a reasonable expectation to actually giving the exam.
The exam rules stated for the past years will apply to students who have followed the course in the past.

Gli studenti e le studentesse con disabilità o con Disturbi Specifici di Apprendimento (DSA), oltre alla segnalazione tramite procedura informatizzata, sono invitati a comunicare anche direttamente al/la docente titolare dell'insegnamento, con un preavviso non inferiore ad una settimana dall'avvio della sessione d'esame, gli strumenti compensativi concordati con l'Unità Special Needs, al fine di permettere al/la docente la declinazione più idonea in riferimento alla specifica tipologia di esame.

Assessment
The assessment is devoted to verify the comprehension of the topics that have been covered throughout the course. The assessment is also addressed to verify the ability of the students to use adequate design methodologies and mathematical tools for the dynamic analysis of machines and structures. Additionally, the presentation and discussion of the project reports is intended to verify the ability of the students to work in team on engineering problems coming from real industrial applications.
Grading criteria
The assessment will include a written test followed by an oral examination. To be allowed to the oral exam the student must have passed the written test with at least 18/30 rating.
Written test
The written test will consist of 30 multiple choice tests (correct answer: 1 point; no answer 0 points; wrong answer: -0.5 points) plus 6 exercises (correct answer: 2 points; no or wrong answer: 0 points) to be answered in 2 hours. At least 15 tests and 4 exercises must be answered correctly to pass to the oral exam. The written exam is valid only within the current exam session. No books, notes or other material are allowed at the written test. Use of a cell phone or other communication device will cause immediate expulsion.
Oral exam
If the rating of the written test is between 18/30 and 23/30 (included) the oral exam may be
substituted by a discussion on the project report. This can produce an increase or a decrease of the rating up to 2 points, depending on how the project are made and resented during the project discussion. A complete failure of answering questions about the project report causes a failure of the exam. If the student aims to obtain more than 23/30 or he has answered less than 15 tests and 4 exercises the oral exam is compulsory.
If the rating of the written test is in between 24/30 and 30/30 the oral exam is compulsory.
The oral exam includes at any rate a discussion on the project reports. A failure of answering the questions on the project reports or the presentation of incomplete projects causes a complete failure of the exam.
It is recommended to book the exam only when there is a reasonable expectation to actually giving the exam.
The exam rules stated for the past years will apply to students who have followed the course in the past.

In addition to the message sent by the online system, students with disabilities or Specific Learning Disorders (SLD) are invited to directly inform the professor in charge of the course about the special arrangements for the exam that have been agreed with the Special Needs Unit. The professor has to be informed at least one week before the beginning of the examination session in order to provide students with the most suitable arrangements for each specific type of exam.

The assessment will include a written test followed by an oral examination. To be allowed to the oral exam the student must have passed the written test with at least 18/30 rating.
Written test
The written test will consist of 30 multiple choice tests (correct answer: 1 point; no answer 0 points; wrong answer: -0.5 points) plus 8 exercises (correct answer: 2 points; no or wrong answer: 0 points) to be answered in 2 hours. At least 15 tests and 4 exercises must be answered correctly to pass to the oral exam. The written exam is valid only within the current exam session. No books, notes or other material are allowed at the written test. Use of a cell phone or other communication device will cause immediate expulsion.
Oral exam
If the rating of the written test is between 18/30 and 23/30 (included) the oral exam may be
substituted by a discussion on the project report. This can produce an increase or a decrease of the rating up to 2 points, depending on how the project are made. A complete failure of answering questions about the project report causes a failure of the exam. If the student aims to obtain more than 23/30 or he has answered less than 15 tests and 4 exercises the oral exam is compulsory.
If the rating of the written test is in between 24/30 and 30/30 the oral exam is compulsory.
The oral exam includes at any rate a discussion on the project reports. A failure of answering the questions on the project reports or the presentation of incomplete projects causes a complete failure of the exam.
It is recommended to book the exam only when there is a reasonable expectation to actually giving the exam.
The exam rules stated for the past years will apply to students who have followed the course in the past.

Assessment
The assessment is devoted to verify the comprehension of the topics that have been covered throughout the course. The assessment is also addressed to verify the ability of the students to use adequate design methodologies and mathematical tools for the dynamic analysis of machines and structures. Additionally, the presentation and discussion of the project reports is intended to verify the ability of the students to work in team on engineering problems coming from real industrial applications.
Grading criteria
The assessment will include a written test followed by an oral examination. To be allowed to the oral exam the student must have passed the written test with at least 18/30 rating.
Written test
The written test will consist of 30 multiple choice tests (correct answer: 1 point; no answer 0 points; wrong answer: -0.5 points) plus 6 exercises (correct answer: 2 points; no or wrong answer: 0 points) to be answered in 2 hours. At least 15 tests and 4 exercises must be answered correctly to pass to the oral exam. The written exam is valid only within the current exam session. No books, notes or other material are allowed at the written test. Use of a cell phone or other communication device will cause immediate expulsion.
Oral exam
If the rating of the written test is between 18/30 and 23/30 (included) the oral exam may be
substituted by a discussion on the project report. This can produce an increase or a decrease of the rating up to 2 points, depending on how the project are made and resented during the project discussion. A complete failure of answering questions about the project report causes a failure of the exam. If the student aims to obtain more than 23/30 or he has answered less than 15 tests and 4 exercises the oral exam is compulsory.
If the rating of the written test is in between 24/30 and 30/30 the oral exam is compulsory.
The oral exam includes at any rate a discussion on the project reports. A failure of answering the questions on the project reports or the presentation of incomplete projects causes a complete failure of the exam.
It is recommended to book the exam only when there is a reasonable expectation to actually giving the exam.
The exam rules stated for the past years will apply to students who have followed the course in the past.

The assessment will include a written test followed by an oral examination. To be allowed to the oral exam the student must have passed the written test with at least 18/30 rating.
Written test
The written test will consist of 30 multiple choice tests (correct answer: 1 point; no answer 0 points; wrong answer: -0.5 points) plus 8 exercises (correct answer: 2 points; no or wrong answer: 0 points) to be answered in 2 hours. At least 15 tests and 4 exercises must be answered correctly to pass to the oral exam. The written exam is valid only within the current exam session. No books, notes or other material are allowed at the written test. Use of a cell phone or other communication device will cause immediate expulsion.
Oral exam
If the rating of the written test is between 18/30 and 23/30 (included) the oral exam may be
substituted by a discussion on the project report. This can produce an increase or a decrease of the rating up to 2 points, depending on how the project are made. A complete failure of answering questions about the project report causes a failure of the exam. If the student aims to obtain more than 23/30 or he has answered less than 15 tests and 4 exercises the oral exam is compulsory.
If the rating of the written test is in between 24/30 and 30/30 the oral exam is compulsory.
The oral exam includes at any rate a discussion on the project reports. A failure of answering the questions on the project reports or the presentation of incomplete projects causes a complete failure of the exam.
It is recommended to book the exam only when there is a reasonable expectation to actually giving the exam.
The exam rules stated for the past years will apply to students who have followed the course in the past.

Assessment
The assessment is devoted to verify the comprehension of the topics that have been covered throughout the course. The assessment is also addressed to verify the ability of the students to use adequate design methodologies and mathematical tools for the dynamic analysis of machines and structures. Additionally, the presentation and discussion of the project reports is intended to verify the ability of the students to work in team on engineering problems coming from real industrial applications.
Grading criteria
The assessment will include a written test followed by an oral examination. To be allowed to the oral exam the student must have passed the written test with at least 18/30 rating.
Written test
The written test will consist of 30 multiple choice tests (correct answer: 1 point; no answer 0 points; wrong answer: -0.5 points) plus 6 exercises (correct answer: 2 points; no or wrong answer: 0 points) to be answered in 2 hours. At least 15 tests and 4 exercises must be answered correctly to pass to the oral exam. The written exam is valid only within the current exam session. No books, notes or other material are allowed at the written test. Use of a cell phone or other communication device will cause immediate expulsion.
Oral exam
If the rating of the written test is between 18/30 and 23/30 (included) the oral exam may be
substituted by a discussion on the project report. This can produce an increase or a decrease of the rating up to 2 points, depending on how the project are made and resented during the project discussion. A complete failure of answering questions about the project report causes a failure of the exam. If the student aims to obtain more than 23/30 or he has answered less than 15 tests and 4 exercises the oral exam is compulsory.
If the rating of the written test is in between 24/30 and 30/30 the oral exam is compulsory.
The oral exam includes at any rate a discussion on the project reports. A failure of answering the questions on the project reports or the presentation of incomplete projects causes a complete failure of the exam.
It is recommended to book the exam only when there is a reasonable expectation to actually giving the exam.
The exam rules stated for the past years will apply to students who have followed the course in the past.

© Politecnico di Torino

Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY

Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY