Servizi per la didattica
PORTALE DELLA DIDATTICA

Digital transmission and communication networks

01QVVLP

A.A. 2019/20

2019/20

Digital transmission and communication networks

This course introduces the mathematical foundations of modern digital transmissions and communication networks, with particular emphasis on the architecture of Internet and on the related digital transmission technologies. Inside the general framework of the Bachelor degree in “Electronics and Communication Engineering” this is the fundamental course in the area of telecommunications, giving the basic foundations of both the physical and network layer of modern telecommunication systems. The course is fully given in English.

Digital transmission and communication networks

This course introduces the mathematical foundations of modern digital transmissions and communication networks, with particular emphasis on the architecture of Internet and on the related digital transmission technologies. Inside the general framework of the Bachelor degree in “Electronics and Communication Engineering” this is the fundamental course in the area of telecommunications, giving the basic foundations of both the physical and network layer of modern telecommunication systems. The course is fully given in English.

Digital transmission and communication networks

For the digital transmission part, the most important learning outcomes are: - knowledge of the main wireless and wired communication channels in terms of their attenuation and available bandwidth - knowledge of the methodologies to mathematically model electrical noise sources and their impact in transmission systems - ability to solve simple signal-to-noise ratio and power budget exercises - knowledge of the basic digital modulations - knowledge of linear distortion effects on digital modulations - ability to solve simple numerical design exercises on transmission systems For the communication networks part, the most important learning outcomes are: - knowledge of the general concepts of communication networks: network topologies, switching techniques (circuit and packet), multiplexing and multiple access techniques, service models (client-server, peer-to-peer), layered protocol architectures, traffic characterization, QoS, error recovery - knowledge of Ethernet and Wi-Fi protocols - knowledge of network and transport protocols in the Internet: IP, TCP/UDP - knowledge of the routing in IP networks - ability to design and plan an IP network - ability to configure an IP network and its routing

Digital transmission and communication networks

For the digital transmission part, the most important learning outcomes are: - knowledge of the main wireless and wired communication channels in terms of their attenuation and available bandwidth - knowledge of the methodologies to mathematically model electrical noise sources and their impact in transmission systems - ability to solve simple signal-to-noise ratio and power budget exercises - knowledge of the basic digital modulations - knowledge of linear distortion effects on digital modulations - ability to solve simple numerical design exercises on transmission systems For the communication networks part, the most important learning outcomes are: - knowledge of the general concepts of communication networks: network topologies, switching techniques (circuit and packet), multiplexing and multiple access techniques, service models (client-server, peer-to-peer), layered protocol architectures, traffic characterization, QoS, error recovery - knowledge of Ethernet and Wi-Fi protocols - knowledge of network and transport protocols in the Internet: IP, TCP/UDP - knowledge of the routing in IP networks - ability to design and plan an IP network - ability to configure an IP network and its routing

Digital transmission and communication networks

This course has the following prerequisites • a good understanding of the mathematical topics presented in the first two years • an excellent understanding of the methodologies and techniques given during the "Signals and Systems" course

Digital transmission and communication networks

This course has the following prerequisites • a good understanding of the mathematical topics presented in the first two years • an excellent understanding of the methodologies and techniques given during the "Signals and Systems" course

Digital transmission and communication networks

The class is divided in two parts. Digital transmission part: • Introduction to wireless and wired communication channels in terms of attenuation and bandwidth (4 hours) • Noise in electronic circuits (noise figure concepts) (8 hours) • Baseband digital modulation (PAM), geometrical representation of signals, bit error probability (12 hours) • Spectral properties of baseband digital modulation (4 hours) • Inter-symbol Interference, Nyquist Theorem and introduction to adaptive equalization (8 hours) • Passband modulation formats (PSK, QAM, FSK): bit error probability and spectral properties. (10 hours) • Block diagram of digital receivers (2 hours) • Final system examples: hints on the physical layer standards for ADSL and DVB-T Communication networks part: • General concepts of computer networks: network classification based on the covered area, network topologies, switching techniques (circuit and packet), multiplexing and multiple access techniques, service models (client-server, peer-to-peer), layered protocol architectures, traffic characterization and QoS requirements (10h) • Error recovery and flow control techniques: ARQ window protocols, data-link layer protocols (4h) • Ethernet and Wi-Fi networks (10h) • Network protocols in the Internet: IPv4 and ICMP, IP addressing, ARP (14h) • Routing in the Internet: IP addressing, routing tables, NAT (12h) • Internet transport layer protocols (TCP, UDP) (6h) • Internet application layer protocols (SMTP, POP and IMAP, HTTP, DNS) (4h)

Digital transmission and communication networks

The class is divided in two parts. Digital transmission part: • Introduction to wireless and wired communication channels in terms of attenuation and bandwidth (4 hours) • Noise in electronic circuits (noise figure concepts) (8 hours) • Baseband digital modulation (PAM), geometrical representation of signals, bit error probability (12 hours) • Spectral properties of baseband digital modulation (4 hours) • Inter-symbol Interference, Nyquist Theorem and introduction to adaptive equalization (8 hours) • Passband modulation formats (PSK, QAM, FSK): bit error probability and spectral properties. (10 hours) • Block diagram of digital receivers (2 hours) • Final system examples: hints on the physical layer standards for ADSL and DVB-T Communication networks part: • General concepts of computer networks: network classification based on the covered area, network topologies, switching techniques (circuit and packet), multiplexing and multiple access techniques, service models (client-server, peer-to-peer), layered protocol architectures, traffic characterization and QoS requirements (10h) • Error recovery and flow control techniques: ARQ window protocols, data-link layer protocols (4h) • Ethernet and Wi-Fi networks (10h) • Network protocols in the Internet: IPv4 and ICMP, IP addressing, ARP (14h) • Routing in the Internet: IP addressing, routing tables, NAT (12h) • Internet transport layer protocols (TCP, UDP) (6h) • Internet application layer protocols (SMTP, POP and IMAP, HTTP, DNS) (4h)

Digital transmission and communication networks

Digital transmission and communication networks

Digital transmission and communication networks

Theoretical lectures will be complemented by practice classes, which will be devoted to the solution of numerical problems and of small design projects on the course main topics.

Digital transmission and communication networks

Theoretical lectures will be complemented by practice classes, which will be devoted to the solution of numerical problems and of small design projects on the course main topics.

Digital transmission and communication networks

The slides and the handouts followed during the classes will be available on the POLITO Didattica web portal. The official textbook for the first part on digital transmission is: • Benedetto, S., Biglieri, E., “Principles of Digital Transmission With Wireless Applications”, Kluwer Academic Publishers, eISBN: 9780306469619 The book is available in the POLITO library system at the following address http://opac.biblio.polito.it/F/?func=direct&doc_number=000200305&local_base=PTOW When possible, the lecture will follow some chapters of the book and use the same notation. Books suggested as text reference for the second part on communication networks: • A.Pattavina: “Reti di telecomunicazioni", Mc.Graw-Hill (in Italian) • J.F. Kurose, K.W. Ross: 'Computer Networking: A Top-Down Approach', Pearson (English) • J.F. Kurose, K.W. Ross: 'Reti di calcolatori e Internet: un approccio top-down', Pearson Italia (in Italia) The exercises on network protocols and on the design of IP networks will follow: • A.Bianco, C.Casetti, P.Giaccone, Esercitazioni di reti telematiche, CLUT (in Italian)

Digital transmission and communication networks

The slides and the handouts followed during the classes will be available on the POLITO Didattica web portal. The official textbook for the first part on digital transmission is: • Benedetto, S., Biglieri, E., “Principles of Digital Transmission With Wireless Applications”, Kluwer Academic Publishers, eISBN: 9780306469619 The book is available in the POLITO library system at the following address http://opac.biblio.polito.it/F/?func=direct&doc_number=000200305&local_base=PTOW When possible, the lecture will follow some chapters of the book and use the same notation. Books suggested as text reference for the second part on communication networks: • A.Pattavina: “Reti di telecomunicazioni", Mc.Graw-Hill (in Italian) • J.F. Kurose, K.W. Ross: 'Computer Networking: A Top-Down Approach', Pearson (English) • J.F. Kurose, K.W. Ross: 'Reti di calcolatori e Internet: un approccio top-down', Pearson Italia (in Italia) The exercises on network protocols and on the design of IP networks will follow: • A.Bianco, C.Casetti, P.Giaccone, Esercitazioni di reti telematiche, CLUT (in Italian)

Digital transmission and communication networks

Modalità di esame: prova scritta; prova orale facoltativa;

Digital transmission and communication networks

The exam will be written for both parts. Each part can be taken independently. Oral part are optional, according to the rules described below, separately on the two parts of the Course. The exam for the part on Digital Transmission is based on: - 2-3 numerical exercises, similar to those that will be solved during the course. - 2-3 theoretical questions, requiring a free-text answer. The exam will last two hours and it will be scored on a full scale up to 30. The evaluation of the written exam is based on the correct development of the proposed exercises from the description of the symbolic-formula solutions up to the numerical results. The theoretical questions will be judged according to the completeness of the answers, but also on the ability of the students to reply in a concise way. This written exam is a “closed-book exam”. During the written exam the student can use only: • A pocket calculator (NO laptop, tablets etc. Any type of cellphone should be switched OFF) • A 4 pages (max) summary of formulas written by the student herself/himself (4 pages total, meaning 2 sheets if one writes on the front and back of each sheet) • Optionally, the tables of numerical values for the erfc function and of Fourier transforms • No other technical material is allowed (thus no books, handouts, old exercises, etc) The students who will get a score above 15/30 at the written exam can ask for an optional oral exam, where the questions will mostly regard the theoretical aspects of the course. The optional oral exam is always organized a few days after the written exams. It gives rise to -3 to +3 points that are added to the result of the written exam. The written exam on the Digital Transmission part proposes exercises that allows to judge if the student knows the topic of the course and is able to apply this knowledge to solve some simplified design examples on modern digital transmission systems. The open questions allows to judge if the student has acquired the most relevant theoretical topic of the course. During the written exam, the students will be allowed to carry with them a pocket calculator, paper and pen and two pages of formulas written by themselves. No other material will be allowed (such as laptops, handouts, etc). The written exam for the part on communication networks is based on: - 2-3 numerical exercises, similar to those that will be solved during the course. - 2-3 theoretical questions, requiring a free-text answer. The exam will last two hours and it will be scored on a full scale up to 30. The evaluation of the written exam is based on the correct development of the proposed exercises from the description of the symbolic-formula solutions up to the numerical results. The theoretical questions will be judged according to the completeness of the answers, but also on the ability of the students to reply in a concise way. This written exam is a “closed-book exam”. During the written exam the student can use only a pocket calculator (NO laptop, tablets etc. Any type of cellphone should be switched OFF). No other technical material is allowed (thus no books, handouts, old exercises, etc). The students who will get a score above 15/30 at the written exam can ask for an optional oral exam, where the questions will mostly regard the theoretical aspects of the course. The optional oral exam is always organized a few days after the written exams. It gives rise to -3 to +3 points that are added to the result of the written exam. Both parts must be passed with >= 18 grade to able to pass the exam. The final grade will be obtained by averaging the grades of both parts.

Digital transmission and communication networks

Exam: written test; optional oral exam;

Digital transmission and communication networks

The exam will be written for both parts. Each part can be taken independently. Oral part are optional, according to the rules described below, separately on the two parts of the Course. The exam for the part on Digital Transmission is based on: - 2-3 numerical exercises, similar to those that will be solved during the course. - 2-3 theoretical questions, requiring a free-text answer. The exam will last two hours and it will be scored on a full scale up to 30. The evaluation of the written exam is based on the correct development of the proposed exercises from the description of the symbolic-formula solutions up to the numerical results. The theoretical questions will be judged according to the completeness of the answers, but also on the ability of the students to reply in a concise way. This written exam is a “closed-book exam”. During the written exam the student can use only: • A pocket calculator (NO laptop, tablets etc. Any type of cellphone should be switched OFF) • A 4 pages (max) summary of formulas written by the student herself/himself (4 pages total, meaning 2 sheets if one writes on the front and back of each sheet) • Optionally, the tables of numerical values for the erfc function and of Fourier transforms • No other technical material is allowed (thus no books, handouts, old exercises, etc) The students who will get a score above 15/30 at the written exam can ask for an optional oral exam, where the questions will mostly regard the theoretical aspects of the course. The optional oral exam is always organized a few days after the written exams. It gives rise to -3 to +3 points that are added to the result of the written exam. The written exam on the Digital Transmission part proposes exercises that allows to judge if the student knows the topic of the course and is able to apply this knowledge to solve some simplified design examples on modern digital transmission systems. The open questions allows to judge if the student has acquired the most relevant theoretical topic of the course. During the written exam, the students will be allowed to carry with them a pocket calculator, paper and pen and two pages of formulas written by themselves. No other material will be allowed (such as laptops, handouts, etc). The written exam for the part on communication networks is based on: - 2-3 numerical exercises, similar to those that will be solved during the course. - 2-3 theoretical questions, requiring a free-text answer. The exam will last two hours and it will be scored on a full scale up to 30. The evaluation of the written exam is based on the correct development of the proposed exercises from the description of the symbolic-formula solutions up to the numerical results. The theoretical questions will be judged according to the completeness of the answers, but also on the ability of the students to reply in a concise way. This written exam is a “closed-book exam”. During the written exam the student can use only a pocket calculator (NO laptop, tablets etc. Any type of cellphone should be switched OFF). No other technical material is allowed (thus no books, handouts, old exercises, etc). The students who will get a score above 15/30 at the written exam can ask for an optional oral exam, where the questions will mostly regard the theoretical aspects of the course. The optional oral exam is always organized a few days after the written exams. It gives rise to -3 to +3 points that are added to the result of the written exam. Both parts must be passed with >= 18 grade to able to pass the exam. The final grade will be obtained by averaging the grades of both parts.



© Politecnico di Torino
Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY
m@il