02OKEND

A.A. 2023/24

Course Language

Inglese

Course degree

Course structure

Teaching | Hours |
---|

Teachers

Teacher | Status | SSD | h.Les | h.Ex | h.Lab | h.Tut | Years teaching |
---|

Teaching assistant

Context

SSD | CFU | Activities | Area context |
---|---|---|---|

2022/23

The course is divided in two parts. In the first part, concerning statistical methods and Monte Carlo techniques, the fundamentals of probability and statistics are given, the Monte Carlo method is introduced and its possible applications to various technical fields are illustrated. In the second part of the course (B), focused on risk analysis, the methodologies adopted for the improvement workers' safety and prevent/mitigate the risks associated to major accidents are presented in relations to different technological applications. Deterministic and statistical techniques adopted for risk analysis are presented and some specific information and procedures for the evaluation and management of major hazards in process plants are given (Seveso Directive).
Lectures are complemented with exercise sessions where specific problems are analysed and worked out as applications of the theoretical presentations. The students are required to carry out independent activities on the subjects of the course and to present a written report on the work done.

The course Monte Carlo methods, safety and risk analysis is composed of two, complementary modules aiming at providing competences relevant for the analysis of complex systems, with a direct application to the field of nuclear and energy engineering, as well as other technical fields characterized by various complex, interconnected phenomena and possibly subject to major accidents.
In the first part of the course (module A - Monte Carlo methods), the students are provided with the necessary competences in order to approach the study of energy system behavior adopting a statistical approach. The fundamentals of probability and statistics are given to allow the students to appreciate the potentialities of the Monte Carlo techniques for the solution of very different engineering problems. The approach to a proper analysis of uncertainties in engineering applications is described, and the possible applications of the Monte Carlo method to various technical fields is illustrated, in particular in the topics of interest for nuclear and energy engineering.
In the second part of the course (module B – Safety and risk analysis), focused on risk analysis, the methodologies adopted for the improvement of workers' safety and for the prevention/mitigation of the risks associated to major accidents are presented in relations to different technological applications. Deterministic and statistical techniques adopted for risk analysis are presented; also, some specific information and procedures for the evaluation and management of major hazards in energy (e.g., nuclear) and, in general, industrial plants are given.

At the end of the course (part B) the student should:
- be able to provide the structure of the risk analysis in the industrial field, identifiying relevant hazards, defining the expected accidental sequences, estimating their probability, and assessing, by simplified tools, the related consequences.
- be able to suggest prevention and mitigation measures to reach an acceptable risk level.

PART B – SAFETY AND RISK ANALYSIS
The objective of this part of the course is to provide the students with competences on: (i) techniques for hazard identification; (ii) methodologies for safety (resp., risk) evaluation and analysis; (iii) methods for the control and reduction of the risks associated to the operation of energy (e.g., nuclear) and, in general, industrial systems and plants (preventive and mitigative actions). These multidisciplinary and transversal competences, typical of safety and reliability analysts and managers, are necessary in every field of modern engineering for the design and operation of safe and reliable systems.
At the end of the course the students should know:
ELO 1 – the (qualitative and quantitative) concepts and definitions of hazard, safety, risk, prevention and mitigation.
ELO 2 – the main contents of the legislation about safety and risk of energy and industrial plants.
ELO 3 – the systemic and systematic formulation of the safety and risk analysis process.
ELO 4 – basic notions on the (qualitative and semi-quantitative) methods for hazard and scenario identification.
ELO 5 – the quantitative approach to safety and risk analysis, and the related (analytical and stochastic simulation-based) evaluation techniques.
ELO 6 – basic notions on the methodological tools to treat the uncertainty in the reliability and risk assessments and to build confidence in the corresponding results.
At the end of the course the students should be able to:
ELO 7 – develop and apply the (qualitative and quantitative, analytical, and stochastic simulation-based) methods for the safety and risk analysis of energy and industrial systems and plants.
ELO 8 – critically evaluate the results obtained by the application of the methods learned, also in relation to the uncertainty and confidence, with which they can be used to take robust decisions about preventive, protective, mitigative and reactive measures.
ELO 9 – communicate the results of their own activity in a technically sound way.

Basic concepts of mathematics, chemistry and physics as obtained in the bachelor's degree program, concepts on process plants, thermal-hydraulics and fluid dynamics.

PART B – SAFETY AND RISK ANALYSIS
Fundamentals of mathematics, applied thermodynamics and physics; concepts on process plants, thermal-hydraulics and fluid dynamics. Basic knowledge of MATLAB.

PART B - SAFETY AND RISK ANALYSIS
__-1- The Risk concept: definition, assessment and tolerability __ __ __
__-2- Methodologies for the safety assessment: __ __ __
a. Hazard identification
b. Methodologies for the reliability assessment of complex systems,
c. Methodologies for the study of accidental sequences,
d. Risk Assessment,
__-3- Major hazards: __ __ __
a. EU and Italian legislation,
b. Description of accidental phenomena by simple methods (loss of containment, fires, explosions, gas dispersion),
c. Vulnerability analysis,
d. Emergency planning.

PART B – SAFETY AND RISK ANALYSIS
1. Introduction and description of the contents of the course: general overview of the safety and risk analysis topics offered and importance of the related transversal and multidisciplinary competences within the Master Degree in Energy and Nuclear Engineering (1.5h).
2. Concepts of hazard, safety, risk (and risk tolerability), prevention and mitigation: qualitative and quantitative definitions. (3h)
3. Introduction (basics) on the Italian and European legislation on safety and risk in the design and operation of energy plants [safety of workers, safety of components, machines and systems, safety of plants subject to major accidents (e.g., nuclear plants, refineries, chemical plants, oil&gas installations)]. (3h)
4. Quantitative Risk Assessment (QRA) framework: (14h)
a) Comparison between deterministic and probabilistic approaches: respective strengths and weaknesses.
b) Basic notions on the qualitative (and/or semi-quantitative) methods for the identification of hazards in the safety (resp., risk) analysis of energy (e.g., nuclear) and, in general, industrial systems and plants: (i) Failure Mode Effect and Criticality Analysis (FMECA) method (for the identification of system failure modes and the corresponding criticality and maintainability analyses); (ii) HAZard and OPerability analysis (HAZOP) method (for the identification of process anomalies).
c) Details on the quantitative techniques adopted in the safety (resp., risk) analysis of energy (e.g., nuclear) and, in general, industrial systems and plants: (i) Event Trees, for the identification of the possible accidental sequences (scenarios); (ii) Fault Trees and Reliability Block Diagrams, for the quantification of the probabilities/frequencies of the accidental sequences (scenarios); (iii) Common Cause Failure analysis, for the treatment of dependent failures between components.
d) Risk matrices and curves, for a qualitative and quantitative ranking of the criticality of the hazards and scenarios identified.
e) Risk analysis as a tool in support of regulatory licensing and operating requirements.
5. Quantitative (both analytical and stochastic, simulation-based) methodologies for the (time-dependent) reliability and availability analysis of equipment and components employed in energy (e.g., nuclear) and, in general, industrial systems and plants: (22.5h)
a) Definitions of (time-dependent) system reliability and availability.
b) Statistical methods for the estimation of reliability and availability parameters from field data (and the related confidence).
c) Analysis and mathematical modeling of realistic procedures like inspection, maintenance, repair, renewal.
d) Importance measures for the assessment of the criticality of industrial (energy) equipment and components.
e) Monte Carlo Simulation strategies (see also Part A of the Course) applied to the estimation of (time-dependent) system reliability and availability indicators.
6. The problem of uncertainty and its analysis: basic notions on the methodological tools to treat uncertainty in the reliability and risk assessments of industrial (energy) systems and to build confidence in the corresponding results. (6h)
7. Case studies: lectures will be complemented by examples concerning the safety and risk analyses of realistic energy components, systems and plants exposed to hazards, as well as by quantitative exercise sessions developed by the teachers and/or by the students themselves (on paper or using laptops). (the number of hours is included in the previous bullet items)

PART B - SAFETY AND RISK ANALYSIS
The course is structured in lectures and and practical sessions to make exercises.
In order to complete their preparation, students can apply the content of the lectures to perform a safety assessment of a part of a real industrial plant. They have to prepare a report describing the analysis performed, that will be discussed during the final examination.

PART B – SAFETY AND RISK ANALYSIS
Lectures by the teachers will be complemented by examples concerning the safety and risk analyses of realistic energy and industrial components, systems and plants exposed to hazards, as well as by quantitative exercise sessions carried out by the teachers and/or by the students themselves (on paper or using laptops).

PART B - SAFETY AND RISK ANALYSIS
The professor provides a booklet and the set of slides used in class during lectures

PART B – SAFETY AND RISK ANALYSIS
MANDATORY MATERIAL
- Booklets and slides provided by the teachers.
OPTIONAL MATERIAL
Safety and Risk analysis (general):
- E. Zio, “Introduction to the basics of reliability and risk analysis”, Editore: World scientific, Anno edizione: 2007.
- E. Zio, “Computational methods for reliability and risk analysis”, Editore: World scientific, Anno edizione: 2009.
- P. Baraldi, F. Cadini, E. Zio, “Introduction to reliability and risk analysis: worked out problems”, Editore: World Scientific, Anno edizione: 2011.
- W. Kroger, E. Zio, “Vulnerable Systems”, Editore: World Scientific, Anno edizione: 2011.
- T. Aven, P. Baraldi, R. Flage and E. Zio, “Uncertainty in risk assessment”, Editore: Wiley, Anno edizione: 2014.
- A.K. Jardine, H.C. Tsang, A. Tsang, “Maintenance, Replacement, and Reliability: Theory and Applications”, Editore: CRC Press, Anno edizione: 2005.
- European Safety and Reliability Association, “Maintenance Modeling and Applications”, Editore: ESRA, Anno edizione: 2010.
Safety and Risk analysis (“nuclear”-oriented):
- M. Modarres, I. S. Kim, “Deterministic and Probabilistic Safety Analysis - Handbook of Nuclear Engineering”, Editore: Springer, Anno edizione: 2010.
- IAEA-TECDOC-1200, “Applications of probabilistic safety assessment (PSA) for nuclear power plants”, Anno edizione: 2001.
- ASME, “Operation and Maintenance of Nuclear Power Plants”, Editore: ASME book, Anno edizione: 2009.

...
PART B - SAFETY AND RISK ANALYSIS
The final exam is organised as a written text that is mandatory. In the written text students have to develop some exercises in order to demonstrate their ability in applying theory and solve practical problems related to safety and risk assessment. The maximum grade that can be obtained in the written test is 27/30.
Student can ask, at the beginning of the course, to enroll for the Project Work, a practical application of Risk Analysis to a portion of a real plant. The Project Work must be made in team working with other 2 or 3 students. Project work will be discussed by an oral exam, planned when the written test has been already passed. The oral discussion of the Project Work can add maximum 4/30 marks.
FINAL MARK
The final mark of the exam is evaluated as the average of the marks obtained in the two parts of the exam, i.e. Monte Carlo Methods (part A) and Safety and Risk Analysis (part B), rounded to the upper integer.

Gli studenti e le studentesse con disabilità o con Disturbi Specifici di Apprendimento (DSA), oltre alla segnalazione tramite procedura informatizzata, sono invitati a comunicare anche direttamente al/la docente titolare dell'insegnamento, con un preavviso non inferiore ad una settimana dall'avvio della sessione d'esame, gli strumenti compensativi concordati con l'Unità Special Needs, al fine di permettere al/la docente la declinazione più idonea in riferimento alla specifica tipologia di esame.

For Part A + B:
The exam is carried out separately for the two parts of the course (A+B) and a grade >=18 is to be obtained on both parts.
For Part B, the evaluation consists in a written and oral exam.
The written test includes both numerical exercises and very brief theoretical questions on all the macro-topics treated (items 2-7 of the Contents section). The exercises are mainly aimed at evaluating the student’s capability of applying the qualitative and quantitative methods for the safety and risk assessment of energy equipment and plants (ELO 7). The theoretical questions will allow verifying the student’s comprehension of the concepts of safety, risk, prevention and mitigation, his/her knowledge of the main legislation related to safety, of the qualitative methods of hazard and scenario identification and characterization, of the fundamentals of the systemic and quantitative approaches to the evaluation of safety and risk of energy plants (ELO 1-6). This part will allow verifying acquired (conceptual, theoretical, and possibly “foundational”) knowledge that cannot be evaluated by numerical exercises. The theoretical questions can be of different nature: (very brief) open questions (e.g., definitions of relevant concepts), or true/false or multiple-choice.
The duration of the written exam is 2h (max). The use of any learning resource (books, handouts, etc.) is not allowed.
This part of the exam will contribute 65% of the final score.
The oral exam will mainly assess the student’s capability of autonomously and critically formulating, in a clear and convincing way, judgments about the confidence and uncertainty in the results of a safety and risk analysis (ELO 8, 9).
This part of the exam will contribute 35% of the final score.
The minimum score that allows passing the exam is 18/30. Maximum score is 30/30 cum laude.
The final grade of the exam is evaluated as the average of the grades obtained in the two parts of the exam, i.e. Monte Carlo Methods (part A) and Safety and Risk Analysis (part B), rounded to the upper integer.

In addition to the message sent by the online system, students with disabilities or Specific Learning Disorders (SLD) are invited to directly inform the professor in charge of the course about the special arrangements for the exam that have been agreed with the Special Needs Unit. The professor has to be informed at least one week before the beginning of the examination session in order to provide students with the most suitable arrangements for each specific type of exam.

© Politecnico di Torino

Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY

Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY