Servizi per la didattica
PORTALE DELLA DIDATTICA

Fundamentals of electrical and electronic systems

03OFTLI, 03OFTLN

A.A. 2021/22

2021/22

Fundamentals of electrical and electronic systems (Electronic systems)

This course addresses the fundamentals of electronic systems, with emphasis on applications relevant to the automotive area.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

The Fundamentals of Electrical Systems module aim to provide * the main concepts related to the behaviour of electrical components and their interconnection * the methodological bases for the analysis of electrical circuits * the basic knowledge of the behaviour of electrical circuits with particular attention to aspects of DC and low frequency.

Fundamentals of electrical and electronic systems (Electronic systems)

This course covers the fundamentals of electronic systems. Following a top-down approach from the system level to the device level, the main tools for analyzing modules for analog and digital electronics are presented with emphasis on applications relevant to the automotive area.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

The Fundamentals of Electrical Systems module aim to provide * the main concepts related to the behaviour of electrical components and their interconnection * the methodological bases for the analysis of electrical circuits * the basic knowledge of the behaviour of electrical circuits with particular attention to aspects of DC and low frequency.

Fundamentals of electrical and electronic systems (Electronic systems)

Analysis of amplifiers and their frequency behaviour. Circuits with operational amplifiers. Basic knowledge about logic technologies and families. Design of basic digital combinatorial and sequential circuits. Properties and design of data acquisition systems.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Knowledge of methods to perform circuit analysis in electrical engineering. Ability to analyze electrical circuits operating in DC Ability to analyze electrical circuits operating in AC

Fundamentals of electrical and electronic systems (Electronic systems)

On successful completion of this course, students will be able to analyze the frequency behaviour of circuits with operational amplifiers, understand the key concepts of digital combinatorial and sequential circuits, and design data acquisition systems.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Knowledge of methods to perform circuit analysis in electrical engineering. Ability to analyze electrical circuits operating in DC Ability to analyze electrical circuits operating in AC

Fundamentals of electrical and electronic systems (Electronic systems)

Linear algebra, differential calculus, complex arithmetic.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Calculus (derivatives, integrals, complex numbers), physics (electric fields, magnetic fields, currents in conductive media)

Fundamentals of electrical and electronic systems (Electronic systems)

Mathematical analysis (differential and integral calculus); complex arithmetic; theory of linear electrical networks: time domain and frequency domain analysis.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Calculus (derivatives, integrals, complex numbers), physics (electric fields, magnetic fields, currents in conductive media)

Fundamentals of electrical and electronic systems (Electronic systems)

Operational amplifiers, filtering and amplifying circuits. Circuits for digital applications: combinational and sequential circuits, memories, and programmable devices. Principles of analog to digital and digital to analog conversion.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Fundamentals of electrical and electronic systems Module: Fundamentals of electrical systems 2020/2021 Instructor: Fabio Freschi Telephone: 011 0907121 Email: fabio.freschi@polito.it Course organization: Pre-recorded lectures will be available weekly on the course website. Live practices (3 hours per week, with all students). During the practice it will be possible to ask questions regarding the theory parts of the course. Interaction and office hours: the official channel for discussion is the specific workspace that will made available on the Slack platform. It is possible to send private and public messages. I encourage students to interact through the platform and try to answer questions asked by colleagues. Information regarding the course will be given using the Slack platform. It is responsibility of the students to stay up to date. Office hours: It is possible to request a personal meeting by appointment (on Slack). Office hours are not a one-to-one lesson. They must be used to clarify the course content or exercises and they suppose a preliminary work by the student. Office: Department of Energy (DENERG) Door 3 (second floor, above room 12) Map: http://www.polito.it/ateneo/sedi/index.php?bl_id=TO_CEN04&fl_id=XP02&rm_id=M001&lang=en Class hours: Tue 11:30-14:30 (room 2M), Wed 14:30-17:30 (room 2C). Practice: Fri 13:00-16:00 (room 7I) Prerequisites: calculus (derivatives, integrals, complex numbers), physics (electric fields, magnetic fields, currents in conductive media) Textbooks and Material: Pre-recorded theory lectures and recordings of the live practices will be available. For further study it is possible to consult the following textbooks C.K. Alexander, M.N.O. Sadiku, “Fundamentals of Electric Circuits”, 6/e, 2017 G. Rizzoni, “Principles and Applications of Electrical Engineering”, 6/e, McGraw-Hill, 2016 J.A. Svoboda, R.C. Dorf, “Introduction to Electric Circuits”, 9/e, Wiley, 2013 Note: I recommend taking your own notes during class hours and metabolize the subject using the textbooks and recordings as learning aids. Exam (warning: rule change): The two modules have a common exam made of two parts. The written exam consists in the solution of four exercises, two each module, in approximately two hours. It is possible to use a scientific calculator and a clean copy of the official formula sheet uploaded on the course website. Answers must be reported on the official examination papers. Extra pages will not be corrected. The final score is the sum of the scores of the two parts. Candidates with positive scores (>8) in both modules and positive final score (18) pass the exam and the final score is registered. Candidates with a final score 25 have access to the optional oral examination that consists of a 1 or 2 questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. A collection of written past exams with solutions is available on the course official web-portal (exclude nodal analysis, controlled sources). Penalties: for each of these mistakes a penalty will be applied to the final score (-1 point) for EE part • Wrong Name/Surname on the exam sheet • Messy exam • Dimensional nonsenses • Missing measurement units • Explicit equality between a time dependent function and a complex number • Missing imaginary unit in reactive impedances • Sum of magnitudes Policies: Attendance to lectures is always welcome. However only students officially enrolled for the course can take the final exam. The final written and oral exams shall be given at the scheduled date and time, as communicated to students, with no exceptions. There will be no make-up exams. Students will be allowed to examine their own written test exclusively on the day of the oral exam. Final grades are not negotiable. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade. Further disciplinary actions may also be taken. Email policy: Always specify Name Surname, ID Number and course. If you are asking for an appointment, propose 2-3 possible dates and time slots. Double check if the email is appropriate versus both the syllabus and the common sense. For questions regarding the course organization and/or exam, always cc prof. Ferraris (luca.ferraris@polito.it). I will not reply to email that are not compliant to the above-mentioned rules. Useful contacts: For students with personal difficult conditions: counseling@polito.it. For critical situations with the teaching staff (professors, assistants, student affairs office, …) garante.studenti@polito.it Disclaimer: This syllabus is subject to change; students who miss class are responsible for learning about any changes to the syllabus.   Lectures PART I: PRELIMINARIES Basic definitions • models • electrical engineering and lumped circuit models: hypotheses • electrical components and terminals, two-terminal components • current and ammeter • voltage and voltmeter • passive and active sign convention • electrical power (wattmeter) and energy, passivity Topology • operative definitions: node, branch, loop, mesh, graph • Kirchhoff’s current law (surface, node) • Kirchhoff’s voltage law (closed path, mesh) Two-terminal components and constitutive equations • constitutive equations • passive elements 1. resistor (resistance, conductance), short circuit, open circuit, ideal switch 2. diode 3. electric energy and capacitor 4. magnetic energy and inductor • active elements 1. voltage generator 2. current generator • controlled generators: 1. voltage controlled voltage source 2. current controlled voltage source 3. voltage controlled current source 4. current controlled current source Solution of the fundamental problem of circuit theory • definition • linearly independent equations: KCL, KVL constitutive equations • method of sparse tableau • non-dynamic networks (algebraic equations), dynamic (differential equations), order of a network PART II: NON-DYNAMIC CIRCUITS Special methods for the solution of electrical circuits • equivalence principle • series and parallel connection 1. definitions 2. series of resistors and voltage division 3. parallel of resistors and current division 4. examples 5. series of generators 6. parallel of generators • star and delta connection • superposition principle (proof) • Millman’s theorem (proof) • Thevenin’s equivalent circuit (proof) • Norton’s equivalent circuit (proof) • Tellegen’s theorem • Maximum power transfer • Circuits with controlled generators General methods for the solution of electrical circuits: nodal analysis • Nodal equations from KCL • Nodal equations by inspection Circuits with diodes • Circuit solution by assumed diode states PART III: DYNAMIC CIRCUITS Transient analysis • constitutive equations of capacitor and inductor • series and parallel connection of capacitors and inductors • solutions of differential equations with constant coefficients: outline 1. associated homogeneous equations 2. particular solution 3. initial conditions • first order differential equations 1. free and forced evolution 2. transient and permanent evolution • RC circuit • RL circuit • Solution of first order circuits with constant inputs (Thevenin, Norton) • Switches Sinusoidal steady state • (summary of complex number algebra) • sinusoidal waveforms • phasor of a sinusoidal waveform • properties of phasors • topological and constitutive equations in phasor domain • impedance, admittance and generalized Ohm’s law • generalization of principles and theorems in phasor domain • phasor diagram • frequency response • power in sinusoidal steady state 1. instantaneous power 2. real and reactive power 3. complex and apparent power 4. maximum power transfer in AC • Boucherot’s law • power factor correction of inductive single-phase loads • non sinusoidal periodic regime • Rectifiers Practice lessons Practice # 1 KVL and KCL Constitutive equations General solution of electric circuits Practice # 2 Evaluation of equivalent resistances Solution of circuits by using voltage and current division Practice # 3 Use of superposition principle Thevenin and Norton equivalent circuits Practice # 4 Millman’s theorem Circuits with diodes Practice # 5 Transient analysis Practice # 6 Sinusoidal steady state analysis of circuits in phasor domain Practice # 7 Sinusoidal steady state: method of power balance

Fundamentals of electrical and electronic systems (Electronic systems)

- Functional block decomposition of complex systems; frequency and time domain representation of signals, analog and digital signals. - Amplifier configurations and main parameters. - Bode plot and dynamic behavior of circuits in time and frequency domain. - Operational amplifiers and negative feedback: inverting and non-inverting stages, and other circuits with operational amplifiers. - Real operational amplifiers. - Principles of analog to digital and digital to analog conversion. - Digital systems: combinational and sequential circuits, interfacing.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

PART I: PRELIMINARIES Basic definitions • models • electrical engineering and lumped circuit models: hypotheses • electrical components and terminals, two-terminal components • current and ammeter • voltage and voltmeter • passive and active sign convention • electrical power (wattmeter) and energy, passivity Topology • operative definitions: node, branch, loop, mesh, graph • Kirchhoff’s current law (surface, node) • Kirchhoff’s voltage law (closed path, mesh) Two-terminal components and constitutive equations • constitutive equations • passive elements 1. resistor (resistance, conductance), short circuit, open circuit, ideal switch 2. diode 3. electric energy and capacitor 4. magnetic energy and inductor • active elements 1. voltage generator 2. current generator • controlled generators: 1. voltage controlled voltage source 2. current controlled voltage source 3. voltage controlled current source 4. current controlled current source Solution of the fundamental problem of circuit theory • definition • linearly independent equations: KCL, KVL constitutive equations • method of sparse tableau • non-dynamic networks (algebraic equations), dynamic (differential equations), order of a network PART II: NON-DYNAMIC CIRCUITS Special methods for the solution of electrical circuits • equivalence principle • series and parallel connection 1. definitions 2. series of resistors and voltage division 3. parallel of resistors and current division 4. examples 5. series of generators 6. parallel of generators • star and delta connection • superposition principle (proof) • Millman’s theorem (proof) • Thevenin’s equivalent circuit (proof) • Norton’s equivalent circuit (proof) • Tellegen’s theorem • Maximum power transfer • Circuits with controlled generators General methods for the solution of electrical circuits: nodal analysis • Nodal equations from KCL • Nodal equations by inspection Circuits with diodes • Circuit solution by assumed diode states PART III: DYNAMIC CIRCUITS Transient analysis • constitutive equations of capacitor and inductor • series and parallel connection of capacitors and inductors • solutions of differential equations with constant coefficients: outline 1. associated homogeneous equations 2. particular solution 3. initial conditions • first order differential equations 1. free and forced evolution 2. transient and permanent evolution • RC circuit • RL circuit • Solution of first order circuits with constant inputs (Thevenin, Norton) • Switches Sinusoidal steady state • (summary of complex number algebra) • sinusoidal waveforms • phasor of a sinusoidal waveform • properties of phasors • topological and constitutive equations in phasor domain • impedance, admittance and generalized Ohm’s law • generalization of principles and theorems in phasor domain • phasor diagram • frequency response • power in sinusoidal steady state 1. instantaneous power 2. real and reactive power 3. complex and apparent power 4. maximum power transfer in AC • Boucherot’s law • power factor correction of inductive single-phase loads • non sinusoidal periodic regime • Rectifiers Practice lessons Practice # 1 KVL and KCL Constitutive equations General solution of electric circuits Practice # 2 Evaluation of equivalent resistances Solution of circuits by using voltage and current division Practice # 3 Use of superposition principle Thevenin and Norton equivalent circuits Practice # 4 Millman’s theorem Circuits with diodes Practice # 5 Transient analysis Practice # 6 Sinusoidal steady state analysis of circuits in phasor domain Practice # 7 Sinusoidal steady state: method of power balance

Fundamentals of electrical and electronic systems (Electronic systems)

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Fundamentals of electrical and electronic systems (Electronic systems)

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Fundamentals of electrical and electronic systems (Electronic systems)

- Theory Lessons - Classroom training aimed at solving problems inherent to the subjects treated in the lessons.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

The course is organised with theory and practice lectures Theory lectures are developed live using a virtual board. The handouts of each lecture is then uploaded on the official course website Practice lessons consist in the numerical solution of exercises proposed by the lecturer.

Fundamentals of electrical and electronic systems (Electronic systems)

General organization: 26 hours of lectures and 14 hours of classroom training aimed at solving problems inherent to the subjects treated in the lessons.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

The course is organised with theory and practice lectures Theory lectures are developed live using a virtual board. The handouts of each lecture is then uploaded on the official course website Practice lessons consist in the numerical solution of exercises proposed by the lecturer.

Fundamentals of electrical and electronic systems (Electronic systems)

- Lecture notes of the course available online - Reference book: R. Jaeger, “Microelectronic Circuit Design, ” McGraw-Hill

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

* Giorgio Rizzoni and James Kearns , "Principles and Applications of Electrical Engineering", 6/e, McGraw-Hill, 2016 * Charles Alexander and Matthew Sadiku, "Fundamentals of Electric Circuits", 7/e, McGraw-Hill, 2021 * Handouts of the lectures Note: I recommend to take your own notes during class hours and metabolize the subject using the textbooks and slides as learning aids.

Fundamentals of electrical and electronic systems (Electronic systems)

- Lecture notes and examples of worked problems available on the course website - Supplemental material: R. Jaeger, “Microelectronic Circuit Design, ” McGraw-Hill

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

* Giorgio Rizzoni and James Kearns , "Principles and Applications of Electrical Engineering", 6/e, McGraw-Hill, 2016 * Charles Alexander and Matthew Sadiku, "Fundamentals of Electric Circuits", 7/e, McGraw-Hill, 2021 * Handouts of the lectures Note: I recommend to take your own notes during class hours and metabolize the subject using the textbooks and slides as learning aids.

Fundamentals of electrical and electronic systems (Electronic systems)

Modalità di esame: Prova scritta (in aula); Prova orale facoltativa;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Modalità di esame: Prova scritta (in aula); Prova orale facoltativa;

Fundamentals of electrical and electronic systems (Electronic systems)

Exam: Written test; Optional oral exam;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Exam: Written test; Optional oral exam;

Fundamentals of electrical and electronic systems (Electronic systems)

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Gli studenti e le studentesse con disabilità o con Disturbi Specifici di Apprendimento (DSA), oltre alla segnalazione tramite procedura informatizzata, sono invitati a comunicare anche direttamente al/la docente titolare dell'insegnamento, con un preavviso non inferiore ad una settimana dall'avvio della sessione d'esame, gli strumenti compensativi concordati con l'Unità Special Needs, al fine di permettere al/la docente la declinazione più idonea in riferimento alla specifica tipologia di esame.

Fundamentals of electrical and electronic systems (Electronic systems)

Exam: Written test; Optional oral exam;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Exam: Written test; Optional oral exam;

Fundamentals of electrical and electronic systems (Electronic systems)

Description The exam includes a written test and an optional oral test. The oral test can be requested according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Fundamentals of Electrical Systems and Fundamentals of Electronic Systems. Each part has a maximum score of 16 points. Each part has * 8 multiple-choice or numerical quizzes for a total of 8 points. If correct, a multiple-choice question is awarded 1 point, an incorrect answer results in 0.25 penalty points. Numerical quizzes are considered correct (1 point) if the numerical value falls within a 5% numerical tolerance (unless otherwise stated). * A problem with multiple questions: 8 total points. The problem is a classical exercise to be solved with paper and pen. Duration The duration of each module is 50 minutes, for a total of 100 minutes. For Students with special needs, the duration of each module is 65 minutes, for a total of 130 minutes. Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * The exam is a “closed book” examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of a one or two questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Description The exam includes a written test and an optional oral test. The oral test can be requested according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Fundamentals of Electrical Systems and Fundamentals of Electronic Systems. Each part has a maximum score of 16 points. Each part has * 8 multiple-choice or numerical quizzes for a total of 8 points. If correct, a multiple-choice question is awarded 1 point, an incorrect answer results in 0.25 penalty points. Numerical quizzes are considered correct (1 point) if the numerical value falls within a 5% numerical tolerance (unless otherwise stated). * A problem with multiple questions: 8 total points. The problem is a classical exercise to be solved with paper and pen. Duration The duration of each module is 50 minutes, for a total of 100 minutes. For Students with special needs, the duration of each module is 65 minutes, for a total of 130 minutes. Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * The exam is a closed book examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of a one or two questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

In addition to the message sent by the online system, students with disabilities or Specific Learning Disorders (SLD) are invited to directly inform the professor in charge of the course about the special arrangements for the exam that have been agreed with the Special Needs Unit. The professor has to be informed at least one week before the beginning of the examination session in order to provide students with the most suitable arrangements for each specific type of exam.

Fundamentals of electrical and electronic systems (Electronic systems)

Modalità di esame: Prova orale facoltativa; Prova scritta tramite PC con l'utilizzo della piattaforma di ateneo;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Modalità di esame: Prova orale facoltativa; Prova scritta tramite PC con l'utilizzo della piattaforma di ateneo;

Fundamentals of electrical and electronic systems (Electronic systems)

The exam is written only. The written test has a “closed book” format, and includes a quiz with multiple questions and one problem. It lasts one hour.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Description The exam has a written and an oral part. The written exam is delivered using the Exam platform, integrated with the proctoring tool Respondus. It is also possible to give an optional oral exam, according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Fundamentals of Electrical Systems and Fundamentals of Electronic Systems. Each part has a maximum score of 16 points. Each part has * 4 multiple-choice quizzes: 0.75 points per questions, -0.25 penalty points for errors * 4 short numerical quizzes: 1.25 points per questions, 5% (unless otherwise stated) of numerical tolerance allowed on the result * Solution of a written exercise with multiple questions: 8 total points. The written exercise is a classical exercise and must be solved on A4 pages, scanned or photographed and uploaded on the Exam platform in digital format. Duration The duration of each module is 50 minutes. There will be a break between the two parts. As an example: * Start Fundamentals of Electrical Systems: 8:00am * End Fundamentals of Electrical Systems: 9:15am * Max duration 50 minutes (increased to 65 minutes for students with special needs) * Start Fundamentals of Electronic Systems: 9:15pm * End Fundamentals of Electronic Systems: 10:30pm * Max duration 50 minutes (increased to 65 minutes for students with special needs) Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * blank A4 sheets (max of 3 pages) for the written exercise to be scanned and uploaded as previously described) * The exam is a “closed book” examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of a 1 or 2 questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Fundamentals of electrical and electronic systems (Electronic systems)

Exam: Optional oral exam; Computer-based written test using the PoliTo platform;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Exam: Optional oral exam; Computer-based written test using the PoliTo platform;

Fundamentals of electrical and electronic systems (Electronic systems)

Description The exam includes a written test and an optional oral test. The written exam is delivered using the Exam platform, integrated with the proctoring tool Respondus. The optional oral exam can be requested according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Electrical Systems and Electronic Systems. Each part has a maximum score of 16 points. Each part has * 8 multiple-choice or numerical quizzes for a total of 8 points. If correct, a multiple-choice question is awarded 1 point, an incorrect answer results in 0.25 penalty points. Numerical quizzes are considered correct (1 point) if the numerical value falls within a 5% numerical tolerance (unless otherwise stated). * A problem with multiple questions: 8 total points. The problem is a classical exercise and must be solved on A4 pages, scanned or photographed and uploaded on the Exam platform in digital format. Duration The duration of each module is 50 minutes. There will be a break between the two parts. As an example: * Start Fundamentals of Electrical Systems: 8:00am * End Fundamentals of Electrical Systems: 9:15am * Max duration 50 minutes (increased to 65 minutes for students with special needs) * Start Fundamentals of Electronic Systems: 9:15pm * End Fundamentals of Electronic Systems: 10:30pm * Max duration 50 minutes (increased to 65 minutes for students with special needs) Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * blank A4 sheets (max of 3 pages) for the written exercise to be scanned and uploaded as previously described) * The exam is a “closed book” examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of one or two questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance, or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Optional oral exam; Computer-based written test with open-ended questions or multiple-choice questions using the Exam platform and proctoring tools (Respondus); Description The exam includes a written test and an optional oral test. The written exam is delivered using the Exam platform, integrated with the proctoring tool Respondus. The optional oral exam can be requested according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Electrical Systems and Electronic Systems. Each part has a maximum score of 16 points. Each part has * 8 multiple-choice or numerical quizzes for a total of 8 points. If correct, a multiple-choice question is awarded 1 point, an incorrect answer results in 0.25 penalty points. Numerical quizzes are considered correct (1 point) if the numerical value falls within a 5% numerical tolerance (unless otherwise stated). * A problem with multiple questions: 8 total points. The problem is a classical exercise and must be solved on A4 pages, scanned or photographed and uploaded on the Exam platform in digital format. Duration The duration of each module is 50 minutes. There will be a break between the two parts. As an example: * Start Fundamentals of Electrical Systems: 8:00am * End Fundamentals of Electrical Systems: 9:15am * Max duration 50 minutes (increased to 65 minutes for students with special needs) * Start Fundamentals of Electronic Systems: 9:15pm * End Fundamentals of Electronic Systems: 10:30pm * Max duration 50 minutes (increased to 65 minutes for students with special needs) Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * blank A4 sheets (max of 3 pages) for the written exercise to be scanned and uploaded as previously described) * The exam is a closed book examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of one or two questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance, or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Fundamentals of electrical and electronic systems (Electronic systems)

Modalità di esame: Prova scritta (in aula); Prova orale facoltativa; Prova scritta tramite PC con l'utilizzo della piattaforma di ateneo;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Modalità di esame: Prova scritta (in aula); Prova orale facoltativa; Prova scritta tramite PC con l'utilizzo della piattaforma di ateneo;

Fundamentals of electrical and electronic systems (Electronic systems)

A written and an oral test. The written test has a “closed book” format. Textbooks and notes are not admitted. A hand calculator with plain numerical capabilities is allowed. The written test includes * A multiple-choice quiz with four questions; a correct answer is awarded 1.5 points, an incorrect answer gives a penalty of 0.5 points * A numerical quiz with four questions; a correct answer, within a 5% numerical tolerance, is awarded 2.5 points * A problem with multiple questions: 16 points. The duration of the written test is 50 minutes. * The examination may be supplemented, at the discretion of the commission or at the request of the student, by an oral exam on all lecture topics. The oral examination consists of two questions related to the course program. The final mark will be the average of the written and oral tests.

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

To guarantee a uniform evaluation of the students, the blended exam is identical to its online version. It is however possible to give the optional oral exam in person, according to the University rules and restrictions. Description The exam has a written and an oral part. The written exam is delivered using the Exam platform, integrated with the proctoring tool Respondus. It is also possible to give an optional oral exam, according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Fundamentals of Electrical Systems and Fundamentals of Electronic Systems. Each part has a maximum score of 16 points. Each part has * 4 multiple-choice quizzes: 0.75 points per questions, -0.25 penalty points for errors * 4 short numerical quizzes: 1.25 points per questions, 5% (unless otherwise stated) of numerical tolerance allowed on the result * Solution of a written exercise with multiple questions: 8 total points. The written exercise is a classical exercise and must be solved on A4 pages, scanned or photographed and uploaded on the Exam platform in digital format. Duration The duration of each module is 50 minutes. There will be a break between the two parts. As an example: * Start Fundamentals of Electrical Systems: 8:00am * End Fundamentals of Electrical Systems: 9:15am * Max duration 50 minutes (increased to 65 minutes for students with special needs) * Start Fundamentals of Electronic Systems: 9:15pm * End Fundamentals of Electronic Systems: 10:30pm * Max duration 50 minutes (increased to 65 minutes for students with special needs) Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * blank A4 sheets (max of 3 pages) for the written exercise to be scanned and uploaded as previously described) * The exam is a “closed book” examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of a 1 or 2 questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Fundamentals of electrical and electronic systems (Electronic systems)

Exam: Written test; Optional oral exam; Computer-based written test using the PoliTo platform;

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Exam: Written test; Optional oral exam; Computer-based written test using the PoliTo platform;

Fundamentals of electrical and electronic systems (Electronic systems)

Description The exam includes a written test and an optional oral test. The written exam is delivered using the Exam platform, integrated with the proctoring tool Respondus. The optional oral exam can be requested according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Electrical Systems and Electronic Systems. Each part has a maximum score of 16 points. Each part has * 8 multiple-choice or numerical quizzes for a total of 8 points. If correct, a multiple-choice question is awarded 1 point, an incorrect answer results in 0.25 penalty points. Numerical quizzes are considered correct (1 point) if the numerical value falls within a 5% numerical tolerance (unless otherwise stated). * A problem with multiple questions: 8 total points. The problem is a classical exercise and must be solved on A4 pages, scanned or photographed and uploaded on the Exam platform in digital format. Duration The duration of each module is 50 minutes. There will be a break between the two parts. As an example: * Start Fundamentals of Electrical Systems: 8:00am * End Fundamentals of Electrical Systems: 9:15am * Max duration 50 minutes (increased to 65 minutes for students with special needs) * Start Fundamentals of Electronic Systems: 9:15pm * End Fundamentals of Electronic Systems: 10:30pm * Max duration 50 minutes (increased to 65 minutes for students with special needs) Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * blank A4 sheets (max of 3 pages) for the written exercise to be scanned and uploaded as previously described) * The exam is a “closed book” examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of one or two questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance, or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Fundamentals of electrical and electronic systems (Fundamentals of electrical)

Optional oral exam; Computer-based written test with open-ended questions or multiple-choice questions using the Exam platform and proctoring tools (Respondus); Description The exam includes a written test and an optional oral test. The written exam is delivered using the Exam platform, integrated with the proctoring tool Respondus. The optional oral exam can be requested according to the rules described below. The written exam will be given at the scheduled date and time, as communicated to students and will consist of two parts: Electrical Systems and Electronic Systems. Each part has a maximum score of 16 points. Each part has * 8 multiple-choice or numerical quizzes for a total of 8 points. If correct, a multiple-choice question is awarded 1 point, an incorrect answer results in 0.25 penalty points. Numerical quizzes are considered correct (1 point) if the numerical value falls within a 5% numerical tolerance (unless otherwise stated). * A problem with multiple questions: 8 total points. The problem is a classical exercise and must be solved on A4 pages, scanned or photographed and uploaded on the Exam platform in digital format. Duration The duration of each module is 50 minutes. There will be a break between the two parts. As an example: * Start Fundamentals of Electrical Systems: 8:00am * End Fundamentals of Electrical Systems: 9:15am * Max duration 50 minutes (increased to 65 minutes for students with special needs) * Start Fundamentals of Electronic Systems: 9:15pm * End Fundamentals of Electronic Systems: 10:30pm * Max duration 50 minutes (increased to 65 minutes for students with special needs) Permissible and non-permissible aids During the exam it is possible to use * a scientific calculator * pen, pencil, drafting instruments * blank A4 sheets (max of 3 pages) for the written exercise to be scanned and uploaded as previously described) * The exam is a closed book examination: books and formula sheets are not admitted. * Everything that is not officially allowed, must be considered as a non-permissible aid. Cheating is a serious academic offense. Students discovered engaging in such behavior during the exam shall earn a failing grade and their case shall be reported to the Academic authorities for further disciplinary actions. Grading The final score is obtained summing up the results of the two parts. The exam is failed if any of the following is verified * total score (Fundamentals of Electrical Systems and Fundamentals of Electronic Systems) lower than 16 points * partial score (Fundamentals of Electrical Systems or Fundamentals of Electronic Systems) lower than 7 points The total score of the two parts will be limited to 30 points in case of higher score. Oral Exam Candidates with a positive total score have access to the optional oral examination that consists of one or two questions related to the course program of both modules. In this case, the final score is the mean value of the written and oral exam. To access the written and oral exam, it is necessary to independently apply through the official registration website. The oral exam will be given remotely, with the teleconference tool communicated to the students a few days in advance, or in person, according to the University rules and restrictions. The oral exam is * mandatory for students with a non sufficient total score (16 or 17 points) * mandatory in case of doubts regarding the written exam. In these cases the Students will be informed a few days after the written test * upon request of the Students

Esporta Word


© Politecnico di Torino
Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY
Contatti