Students will acquire knowledge on broadband wireless networks, the challenges that they exhibit and current approaches. By doing this, students will learn methods for network design and possible solutions to the problems that broadband networks pose. In more detail, the competences that students will acquire are as follows: 1. Knowledge of the main aspects of the existing and emerging technologies for broadband wireless networking 2. Knowledge of the design and analysis of cellular and WiFi networks and their integration 3. Knowledge of the design and analysis of techniques for the transport of user traffic (data plane) 4. Knowledge of the algorithms and the protocols for the management of user mobility 5. Knowledge of the algorithms and the protocols for QoS provisioning 6. Ability to analyse and identify capabilities and critical issues of network systems 7. Ability to design a medium control access scheme and traffic scheduling algorithms 8. Ability to design algorithms and protocols for user mobility management 9. Ability to design algorithms and protocols for QoS provisioning 10. Ability to understand and solve technical problems related to the interaction of communication nodes in complex network systems.

Students are assumed to have basic knowledge on the following topics in physical layer of communication systems: - Channel Coding - Modulations - Channel models: AWGN channel, frequency and time selective fading channel, multi antenna and multi user channels. Students are assumed to have basic knowledge on the following topics in networking: - ISO/OSI protocol stack - Circuit and packet switching - Ethernet - Basic knowledge of multiple access techniques - Basic knowledge of TCP/IP

Class lectures illustrate the main wireless network systems conceived and designed for the support of multimedia traffic and innovative applications, mainly hotspot WiFi, cellular wireless networks (5G included). For each of them, the course will highlight and discuss aspects related to the support of quality of service (QoS) and user mobility. The description of the detailed course content is reported below, along with the weight of each topic expressed in hours. + Wireless cellular networks: - General principles, network planning and heterogeneous networks (6 h) - Evolution of cellular networks from 2G to 4G (20 h): Main solutions for QoS guarantees and user mobility support - 5G networks (6h): enabling technologies (SDN/NFV) and novel radio access schemes + Hotspot WiFi (18 h): - IEEE 802.11a/b/g/n - Channel access techniques - Quality of service support - Integration with cellular networks and traffic offloading + Numerical exercises on WiFi and cellular networks account for 10 h.

The course includes both lectures and numerical exercises. The latter consist in the presentation and solution of numerical problems, and aim at clarifying and further investigating some of the concepts that are presented in the class lecturers. Lectures are held with the support of slides. Numerical exercises are presented and solved using the blackboard. Technical discussions during class lectures will also help to assess the acquired level of knowledge and ability at the different stages of the course. Typically, the course hosts a couple of seminars by mobile operators, who present the latest advances on standardization and the evolution of actual broadband communication networks.

The teaching material consists of copy of the slides presented during the course, text of numerical problems, and suggested reading. All the material is available on the web portal of the course. Useful references are as follows: - WCDMA for UMTS: radio access for third generation mobile communications, H. Holma and A. Toskala (Ed.s), Wiley, 2000. - B.A. Miller, C. Bisdikian, Bluetooth Revealed,Prentice-Hall, 2002 - M. Gast, 802.11 Wireless Networks: The Definitive Guide, O'Reilly (Networking), 2002. - F. Hillebrand, GSM and UMTS, The Creation of Global Mobile Communications, John Wiley & Sons, 2002. - Multimedia over IP and Wireless Networks, Chu and M. van der Schaar (Eds.), Academic Press, 2007. - F. Khan, LTE for 4G Mobile Broadband, Cambridge University Press, 2009.

Exam: Written test;

The exam consists of a written test, which lasts about 1 hour. No oral exam is foreseen. It is a closed-book exam, i.e., students cannot use textbooks, copy of the slides, or copy of the solutions of numerical problems. The test focuses on all course topics. The test includes about 10 questions, among which there is at least one numerical problem to solve. The remaining questions require a brief description and/or analysis of system aspects and can be open or multiple-choice questions. The objective of the numerical problem is to verify the ability of the students to understand and solve technical problems on the interaction of communication nodes. The remaining questions require the description and the analysis of a system aspect. This part of the test aims at assessing the knowledge and abilities acquired by the students on the design and performance of network architectures, algorithms and protocols. Specifically, the test will assess the students' knowledge on Wi-Fi based and cellular networks, as well as on connected cars systems. The test will also assess the students' ability to design algorithms for physical resources and traffic scheduling, algorithms and protocols for the efficient support of mobility, and network systems that meet certain quality of service requirements. Finally, the the test will aim to assess students' understanding of complex network systems. Each question is assigned a number of points, which reflects the level of difficulty of the question/problem. The answers to open questions are evaluated considering their correctness, the level of knowledge that the student has acquired on the topic, and the student’s ability to precisely answer the question and to clearly communicate the technical material with accurate terms. The solution of numerical problems is evaluated based on its correctness and technical rigor, on the rational followed by the student and on the student’s ability to apply the acquired know-how. The final mark is computed by summing the marks obtained in each question, with the maximum final mark being 30/30 cum laude; the minimum mark students have to achieve in order to pass the exam is 18/30. Examples of numerical problems from previous tests (along with their solutions) are made available through the course web portal. Examples of questions other than numerical problems, are provided during the class.

In addition to the message sent by the online system, students with disabilities or Specific Learning Disorders (SLD) are invited to directly inform the professor in charge of the course about the special arrangements for the exam that have been agreed with the Special Needs Unit. The professor has to be informed at least one week before the beginning of the examination session in order to provide students with the most suitable arrangements for each specific type of exam.

Exam: Computer-based written test using the PoliTo platform;

The exam consists of a written test, which lasts about 1 hour and 15 minutes. It is a closed-book exam, i.e., students cannot use textbooks, copy of the slides, or copy of the solutions of numerical problems. The test focuses on all course topics. The test includes about 5 questions, among which there is at least one numerical problem to solve. The remaining questions require a brief description and/or analysis of system aspects and can be open or multiple-choice questions. The objective of the numerical problem is to verify the ability of the students to understand and solve technical problems on the interaction of communication nodes. The remaining questions require the description and the analysis of a system aspect. This part of the test aims at assessing the knowledge and abilities acquired by the students on the design and performance of network architectures, algorithms and protocols. The test will also assess the students' ability to design algorithms for physical resources and traffic scheduling, algorithms and protocols for the efficient support of mobility, and network systems that meet certain quality of service requirements. Finally, the the test will aim to assess students' understanding of complex network systems. Each question is assigned a number of points, which reflects the level of difficulty of the question/problem. The answers to open questions are evaluated considering their correctness, the level of knowledge that the student has acquired on the topic, and the student’s ability to precisely answer the question and to clearly communicate the technical material with accurate terms. Multiple-choice questions (if any) are evaluated based on their correctness; no penalty (negative mark) is assigned in case of wrong answer. The solution of numerical problems is evaluated based on its correctness and technical rigor, on the rational followed by the student and on the student’s ability to apply the acquired know-how. The final mark is computed by summing the marks obtained in each question, with the maximum final mark being 30/30 cum laude; the minimum mark students have to achieve in order to pass the exam is 18/30. Examples of numerical problems from previous tests (along with their solutions) are made available through the course web portal. Examples of questions other than numerical problems, are provided during the class.

Exam: Written test; Paper-based written test with video surveillance of the teaching staff; Computer-based written test using the PoliTo platform;

The exam consists of a written test, which lasts about 1 hour and 15 minutes. It is a closed-book exam, i.e., students cannot use textbooks, copy of the slides, or copy of the solutions of numerical problems. The test focuses on all course topics. The test includes about 5 questions, among which there is at least one numerical problem to solve. The remaining questions require a brief description and/or analysis of system aspects and can be open or multiple-choice questions. The objective of the numerical problem is to verify the ability of the students to understand and solve technical problems on the interaction of communication nodes. The remaining questions require the description and the analysis of a system aspect. This part of the test aims at assessing the knowledge and abilities acquired by the students on the design and performance of network architectures, algorithms and protocols. The test will also assess the students' ability to design algorithms for physical resources and traffic scheduling, algorithms and protocols for the efficient support of mobility, and network systems that meet certain quality of service requirements. Finally, the the test will aim to assess students' understanding of complex network systems. Each question is assigned a number of points, which reflects the level of difficulty of the question/problem. The answers to open questions are evaluated considering their correctness, the level of knowledge that the student has acquired on the topic, and the student’s ability to precisely answer the question and to clearly communicate the technical material with accurate terms. Multiple-choice questions (if any) are evaluated based on their correctness; no penalty (negative mark) is assigned in case of wrong answer. The solution of numerical problems is evaluated based on its correctness and technical rigor, on the rational followed by the student and on the student’s ability to apply the acquired know-how. The final mark is computed by summing the marks obtained in each question, with the maximum final mark being 30/30 cum lode; the minimum mark students have to achieve in order to pass the exam is 18/30. Examples of numerical problems from previous tests (along with their solutions) are made available through the course web portal. Examples of questions other than numerical problems, are provided during the class.