PORTALE DELLA DIDATTICA

Ricerca CERCA
  KEYWORD

Development of a Human-Machine Interface (HMI) for the operation of a robotic aerial manipulator

azienda Thesis in external company    estero Thesis abroad


keywords DRONES, HUMAN MACHINE INTERFACE, ROBOTICS, UNMANNED AERIAL VEHICLES

Reference persons ALESSANDRO RIZZO

External reference persons Juan Cortés and Antonio Franchi (Laboratoire d'Analyse et d'Architecture des Systèmes, Toulouse, France)

Thesis type EXPERIMENTAL / DEVELOPMENT

Description The Robotics and Interactions (RIS) group of LAAS-CNRS is developing a novel robotic aerial system, capable
of manipulating (controlling both position and orientation) objects in the air. The system, which we call FlyCrane,
is composed of three aerial robots attached to a platform by three pairs of cables (see image below). The
FlyCrane has significant advantages over existing systems for transporting loads using helicopters, mainly
safety, robustness and accuracy. The applications of such a system are numerous: construction/assembly in
areas difficult to access, rescue missions in dangerous areas, … In recent years, we developed motion planning
and control methods for the FlyCrane [1], and we did a proof of concept with an indoor prototype, using
quadrotors. We are currently building a lager prototype, using hexarotors, for outdoor experiments.
Our next goal is to develop methods allowing the teleoperation of the FlyCrane. Indeed, for most applications,
and because of legal constraints, it may be preferable to put in the loop an operator to guide the system and/or
locally modify the planned trajectories. However, an operator would not be able to pilot a system as complex as
the FlyCrane without the help of algorithms. Therefore, we aim to develop a human-machine interface (HMI)
allowing the operator to easily control the pose (position and orientation) of the transported/manipulated object,
and to use control algorithms to adapt the state of robots automatically in real time.
The main objective of this project is to design and implement the HMI and associated software to facilitate
teleoperation. The HMI will be composed of a remote control system and a screen (e.g. a tablet) to provide visual
information to the operator aiming to increase security. For example, sensor information about the proximity to
obstacles or engine saturation will be displayed on the tablet to alert the operator of a possible danger.
References:
[1] M Manubens, D Devaurs, L Ros, J Cortés, Motion planning for 6-D manipulation with aerial towed-cable systems,
Robotics: Science and Systems (RSS), 2013

See also  stage_hmi_flycrane.pdf 


Deadline 20/07/2020      PROPONI LA TUA CANDIDATURA




© Politecnico di Torino
Corso Duca degli Abruzzi, 24 - 10129 Torino, ITALY
Contatti